Mitsubishi Electric MELSEC iQ-F FX5 User Manual page 265

In the wave output mode
■System configuration
The following shows a system configuration example.
(1)
(1) CPU module (FX5U CPU module)
(2) Analog output module (FX5-4DA)
■Parameter settings
Perform the initial setting using the module and module extension parameters of GX Works3. The refresh settings do not need
to be changed here.
• Module parameters
Set the module parameters as follows.
[Basic setting]
[Application setting]
(2)
2
2 FX5-4DA
263
2.9 Programming