Mitsubishi Electric MELSEC iQ-F FX5 User Manual page 486

CH1 Input type/range setting (Offset/gain setting)
The area is to set the range setting (Offset/gain setting).
Setting value
0
1
Setting a value other than the above causes an input type/range setting range error (error code: 190H).
■Buffer memory address
The following shows the buffer memory address of this area.
Buffer memory name
CH Setting Input type/range (Offset/gain setting)
CH Setting Input type/range (Offset/gain setting) (In FX2N
allocation mode function)
■Enabling the setting
Turn offonoff 'Operating condition setting request' (Un\G70, b9) to enable the setting.
■Default value
The default value is Factory default setting (0).
Error history
Up to 16 errors that occurred in the multi input module are recorded.
b15
Un\G3600
First two digits of the year
Un\G3601
Un\G3602
Un\G3603
Un\G3604
Millisecond (higher-order digits)
Un\G3605
Un\G3606
Un\G3609
Item
First two digits of the year/Last two digits of the
year
Month/Day
Hour/Minute
Second
Day of the week
Millisecond (upper)
Millisecond (lower)
*1 These values assume that an error occurs at 10:35 and 40.628 seconds on Monday, January 30th, 2017.
■Buffer memory address
The following shows the buffer memory address of this area.
Buffer memory name
Error history
Error history (In FX2N allocation mode function)
APPX
484
Appendix 12 Buffer Memory Areas
to
b8 b7
Error code
Month
Hour
Second
Millisecond (lower-order digits)
System area
Storage contents
Stored in BCD code.
One of the following values is stored in BCD code.
Sunday: 0, Monday: 1, Tuesday: 2, Wednesday: 3, Thursday: 4,
Friday: 5, Saturday: 6
Stored in BCD code.
No.1 to No.16
3600 to 3759
8600 to 8759
Description
Factory default setting
User range setting
CH1 CH2 CH3
599 799 999
1311 1312 1313
b0
to
Last two digits of the year
Day
Minute
Day of the week
CH4 CH5 CH6
1199 1399 1599
1314 1315 1316
Storage example
2017H
0130H
1035H
40H
1H
06H
28H
CH7 CH8
1799 1999
1317 1318
*1