Mitsubishi Electric MELSEC iQ-F FX5 User Manual page 310

CH1 Range setting monitor
The value of the output range set by 'CH1 range setting' (Un\G598) can be checked.
Monitor value
0003H
0002H
0005H
0006H
0000H
0007H
000DH
000EH
■Buffer memory address
The following shows the buffer memory addresses of this area.
Buffer memory area name
CH Range setting monitor
CH Range setting monitor (in FX3 allocation
mode function)
CH1 HOLD/CLEAR function setting monitor
The setting status of the HOLD/CLEAR function can be checked.
Monitor value
0
1
2
■Buffer memory address
The following shows the buffer memory addresses of this area.
Buffer memory area name
CH HOLD/CLEAR function setting monitor
CH HOLD/CLEAR function setting monitor (in
FX3 allocation mode function)
CH1 Wave output conversion cycle monitor
The wave output conversion cycle can be checked.
Only when the wave output function is used and the operation mode is normal mode, a value is stored in the area. Otherwise,
0 is stored.
The unit of the stored value is s.
When 'Operating condition setting request' (Un\G70, b9) is turned on and off, the monitored value is updated.
■Buffer memory address
The following shows the buffer memory addresses of this area.
Buffer memory area name
CH Wave output conversion cycle monitor
CH Wave output conversion cycle monitor (in
FX3 allocation mode function)
APPX
308
Appendix 8 Buffer Memory Areas
Description
4 to 20 mA
0 to 20 mA
1 to 5 V
0 to 5 V
-10 to +10 V
0 to 10 V
User range setting (voltage)
User range setting (current)
CH1 CH2
430 630
3211 3212
Description
CLEAR
Previous Value
Setting value
CH1 CH2
431 631
3221 3222
CH1 CH2
432, 433 632, 633
9010, 9011 9012, 9013
CH3 CH4
830 1030
3213 3214
CH3 CH4
831 1031
3223 3224
CH3 CH4
832, 833 1032, 1033
9014, 9015 9016, 9017