Connection and disconnection of the cable
■Connection of the cable
Fully insert a cable whose end has been properly processed into the wire insertion opening.
If the cable cannot be inserted with this procedure, fully insert the cable while pushing the open/close button with a flathead
screwdriver having a tip width of 2.0 to 2.5 mm. After fully inserting the cable, remove the screwdriver.
Open/close button
Wire insertion opening
<Reference>
Manufacturer
PHOENIXCONTACT GmbH & Co. KG
Precautions
Pull the cable or wire ferrule slightly to check that the cable is securely clamped.
■Disconnection of the cable
While pushing the open/close button with a flathead screwdriver having a tip width of 2.0 to 2.5 mm, disconnect the cable.
Terminal arrangement
V+
CH1
I+
COM
V+
I+
CH2
COM
FG
FG
Left side of terminal arrangement
Display name
V+
I+
COM
V+
I+
COM
FG
FG
1 FX5-4AD
86
1.6 Wiring
Flathead screwdriver
Wire
V+
I+
CH3
COM
V+
I+
CH4
COM
FG
FG
Description
CH1 Voltage input
CH1 Current input
CH1 COM
CH2 Voltage input
CH2 Current input
CH2 COM
Unused
Frame ground
Frame ground
Model
SZS 0.4 2.5 VDE
Right side of terminal arrangement
Display name
Description
V+
CH3 Voltage input
I+
CH3 Current input
COM
CH3 COM
V+
CH4 Voltage input
I+
CH4 Current input
COM
CH4 COM
Unused
FG
Frame ground
FG
Frame ground