Parameter Name; Dynamic Routing; Event Reception From Other Stations; Module Operation Mode - Mitsubishi Electric MELSEC iQ-R Series User Manual

Parameter Name

Set a name for the module parameter if desired.
Item
Parameter Name

Dynamic Routing

Select whether to enable the dynamic routing function. (Page 61 Communications using the engineering tool)
Item
Dynamic Routing
When enabling dynamic routing, do not connect the CPU module (built-in Ethernet port part) and the Motion
module on the same Ethernet using a switching hub or other means.

Event Reception from Other Stations

Select whether to obtain the events occurring in the other stations.
Item
Event Reception from Other Stations

Module Operation Mode

Set the module operation mode of the Motion module.
Item
Module Operation Mode
2 PARAMETER SETTINGS
110
2.4 Application Settings
Description
Set a name for the module parameter if desired.
Description
When communicating with different networks, select whether to enable the dynamic
routing function.
Description
Select whether to obtain the events occurring in the other stations.
Description
Online
• Select this mode to connect the Motion module to the network for performing data
link with other stations.
Setting range
Up to 8 one-byte or two-byte
characters
(Default: empty)
Setting range
• Enable
• Disable
(Default: Enable)
Setting range
• Enable
• Disable
(Default: Enable)
Setting range
