Mitsubishi Electric MELSEC iQ-F FX5 User Manual page 470

CH1 Process alarm upper upper limit value
Set an upper upper limit value of the alert output function (Process alarm).
For details on the alert output function, refer to the following.
Page 354 Alert output function
■Buffer memory address
The following shows the buffer memory address of this area.
Buffer memory name
CH Process alarm upper upper limit value
CH Process alarm upper upper limit value (in FX2N
allocation mode function)
■Setting range
The possible setting range is from -32768 to +32767.
■Enabling the setting
Turn offonoff 'Operating condition setting request' (Un\G70, b9) to enable the setting.
■Default value
The default value is set to 0.
CH1 Process alarm upper lower limit value
Set an upper lower limit value of the alert output function (Process alarm).
For details on the alert output function, refer to the following.
Page 354 Alert output function
■Buffer memory address
The following shows the buffer memory address of this area.
Buffer memory name
CH Process alarm upper lower limit value
CH Process alarm upper lower limit value (in FX2N
allocation mode function)
■Setting range
The possible setting range is from -32768 to +32767.
■Enabling the setting
Turn offonoff 'Operating condition setting request' (Un\G70, b9) to enable the setting.
■Default value
The default value is set to 0.
APPX
468
Appendix 12 Buffer Memory Areas
CH1 CH2 CH3
514 714 914
81 82 83
CH1 CH2 CH3
516 716 916
1191 1192 1193
CH4 CH5 CH6
1114 1314 1514
84 85 86
CH4 CH5 CH6
1116 1316 1516
1194 1195 1196
CH7 CH8
1714 1914
87 88
CH7 CH8
1716 1916
1197 1198