Programming; Programming Procedure - Mitsubishi Electric MELSEC iQ-F FX5 User Manual

3.9

Programming

This section describes the programming procedure and the basic program of a multiple input module.

Programming procedure

Take the following steps to create a program for running a multiple input module:
1.
Set parameters.
2.
Create a program.
System configuration example
■System configuration
(1)
(1) CPU module (FX5U CPU module)
(2) Multiple input module (FX5-8AD)
■Parameter settings
Perform an initial setting in the module parameter of GX Works3. The refresh settings do not need to be changed here.
• Basic setting
Configure the basic setting as shown below.
(2)
3
3 FX5-8AD
405
3.9 Programming