Chapter 2 Fx5-4Da; Overview; Specifications; General Specifications - Mitsubishi Electric MELSEC iQ-F FX5 User Manual

2
FX5-4DA
2.1

Overview

The FX5-4DA analog output module is an intelligent function module that converts 4 points of digital values into analog output
(voltage, current).
It can be added to an FX5 CPU module and can output 4 channels of voltage/current.
(1)
(1) FX5 CPU module
(2) Analog output module (FX5-4DA)
(3) Analog device connection cable
(4) Analog device (e.g. inverter)
2.2

Specifications

This section describes the specifications of FX5-4DA.

General specifications

The general specifications other than below are the same as those for the CPU module to be connected.
For general specifications, refer to the following manuals.
MELSEC iQ-F FX5U User's Manual (Hardware)
MELSEC iQ-F FX5UC User's Manual (Hardware)
Items
Dielectric withstand voltage
Insulation resistance

Power supply specifications

The following table lists the power supply specifications.
Items
External power supply
Internal power supply
2 FX5-4DA
176
2.1 Overview
(2)
(3)
24 V DC
Specifications
500 V AC for 1 minute
10 M or higher by 500 V DC
insulation resistance tester
Specifications
Power supply voltage 24 V DC +20%, -15%
Allowable momentary Operation continues when the instantaneous power failure is shorter than 5 ms.
power outage time
Current consumption 150 mA
Power supply voltage 5 V DC
Current consumption 100 mA
(4)
Between all terminals and ground terminal