Mitsubishi Electric MELSEC iQ-F FX5 User Manual page 328

Wave data registry area
This area is for registering wave data for analog output in the wave output mode.
The setting range depends on the set output range. The setting range is shown below.
Output range
4 to 20 mA
0 to 20 mA
1 to 5 V
0 to 5 V
0 to 10 V
-10 to +10 V
In the channel where the wave data with a value out of the above setting range set is output, a digital value setting range error
(error code: 191H) occurs and 'Error flag' (Un\G69, b15) turns on. The wave output operations continue to be performed.
However, the analog output value corresponding to a digital input value out of the setting range is fixed to the maximum or
minimum value of the output range.
■Buffer memory address
The following shows the buffer memory address of this area.
Buffer memory name
Wave data registry area
Wave data registry area (in FX3 allocation mode
function)
APPX
326
Appendix 8 Buffer Memory Areas
Setting range
0 to 32767 (practical range: 0 to 32000)
-32768 to +32767 (practical range: -32000 to +32000)
CH1 CH2
10000 to 89999
10000 to 89999
CH3 CH4