Mitsubishi Electric MELSEC iQ-F FX5 User Manual page 315

CH1 D/A conversion enable/disable setting
Set whether to enable or disable the D/A conversion.
For details on the D/A conversion enable/disable setting function, refer to the following.
Page 185 D/A conversion enable/disable function
Setting value
0
1
When a value other than the above is set, the value is processed as D/A conversion disable (1).
■Buffer memory address
The following shows the buffer memory address of this area.
Buffer memory name
CH D/A conversion enable/disable setting
CH D/A conversion enable/disable setting (in
F3 allocation mode function)
■Enabling the setting
Turn on and off 'Operating condition setting request' (Un\G70, b9) to enable the setting.
■Default value
• In the normal mode: The default value is D/A conversion disable (1) for all the channels.
• In the FX3 allocation mode: The default value is D/A conversion enable (0) for all the channels.
CH1 Scaling enable/disable setting
Set whether to enable or disable the scaling.
For the scaling function, refer to the following.
Page 189 Scaling function
Setting value
0
1
If a value other than the above is set, a scaling enable/disable setting range error (error code: 1A0H) occurs.
The scaling function cannot be used when the wave output function is used. In the channel for which Enable (0) is set while
the wave output function is being used, a scaling setting error in wave output mode (alarm code: 0B0H) occurs.
■Buffer memory address
The following shows the buffer memory address of this area.
Buffer memory name
CH Scaling enable/disable setting
CH Scaling enable/disable setting (In FX3
allocation mode function)
■Enabling the setting
Turn on and off 'Operating condition setting request' (Un\G70, b9) to enable the setting.
■Default value
The default value is Disable (1) for all the channels.
Description
D/A conversion enabled
D/A conversion disabled
CH1 CH2
500 700
3271 3272
Description
Enable
Disable
CH1 CH2
502 702
3281 3282
CH3 CH4
900 1100
3273 3274
CH3 CH4
902 1102
3283 3284
Appendix 8 Buffer Memory Areas
A
APPX
313