Compliance Statements For Nebs; Router; Canada; European Community - Juniper ACX2000 Quick Start Manual

ACX2000 and ACX2100 Universal Access Routers Quick Start

Compliance Statements for NEBS

Compliance Statements for EMC Requirements for the ACX2000 and ACX2100 Router

Canada

European Community

Declaration of Conformity

22
When you install the router, always make the ground connection first and disconnect
it last.
Wire the DC power supply using the appropriate lugs. Always connect the ground wire
first and disconnect it last.
Do not work on the system or connect or disconnect cables during electrical storms.
Before working on equipment that is connected to power lines, remove jewelry, including
rings, necklaces, and watches. Metal objects heat up when connected to power and
ground and can cause serious burns or become welded to the terminals.
Failure to observe these safety warnings can result in serious physical injury.
The recommended maximum ambient temperature is 149° F (65° C). For safe operation
take into consideration the internal temperature within the rack.
Note the hot surface warning label on the top rear of the chassis.
The equipment is suitable for installation as part of the Common Bonding Network
(CBN).
The equipment is suitable for installation in locations where the National Electrical
Code (NEC) applies.
The battery return connection is to be treated as an isolated DC return (that is, DC-I),
as defined in GR-1089-CORE.
Canada on page 22
European Community on page 22
Declaration of Conformity on page 22
This Class A digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe A est conforme à la norme NMB-003 du Canada.
This is a Class A product. In a domestic environment this product may cause radio
interference in which case the user may be required to take adequate measures.
This topic shows the Declaration of Conformity for the router.
Copyright © 2012, Juniper Networks, Inc.