Table of Contents
Advertisement
12.6 Configuring PGM MGT
With this function you can determine the features of the file
manager:
Standard: Simple file management without directory display
Expanded range: File management with additional functions and
directory display
See also „section 4.3 Standard File Management" and
„section 4.4 File Management with Additional
Functions" .
Changing the setting
Select the file manager in the Programming and Editing mode of
operation: press the PGM MGT key
Select the MOD function: Press the MOD key
Select the PGM MGT setting: using the arrow keys, move the
highlight onto the PGM MGT setting and use the ENT key to
switch between STANDARD and ENHANCED.
12.7 Machine-Specific User Parameters
The machine tool builder can assign functions to up to 16
user parameters. Your machine manual provides more
detailed information.
12.8 Showing the Workpiece in the
Working Space
This MOD function enables you to graphically check the position of
the workpiece blank in the machine's working space and to activate
work space monitoring in the Test Run mode of operation. This
function is activated with the „ datum set + soft key.
The TNC displays the working space, various windows containing
coordinate information, and soft keys with which you can change
the display.
Available traversing range/datums, referenced to the displayed
workpiece blank:
Working space
Size of the blank
Coordinate system
Workpiece blank with orthogonal projections, working space
To show the position of the workpiece blank referenced to the
datum, press the soft key marked with the machine symbol.
HEIDENHAIN TNC 426 B, TNC 430
www.EngineeringBooksPdf.com
311
Advertisement
Table of Contents
