Using The Service Manual; About This Manual; Further Service Manuals - HEIDENHAIN iTNC 530 Service Manual

2

Using the Service Manual

2.1

About this Manual

This service manual will assist service personnel in the diagnosis and correction of errors on
TNC-controlled machine tools.
It includes:
The "Overview of Possible Errors" on page 26 often includes references to the descriptions of
error diagnosis. You will find these descriptions in the chapters of the Service Manual structured
according to topics.
The Service Manual does not provide commissioning support!
It comprises the service possibilities with the current hardware and software of the control at
the editing date of this manual. The service possibilities of your units may differ from the manual.
Hardware or software based differences in servicing are indicated in the corresponding
descriptions.
This manual is valid for:
It must be provided that ...
Udpate service This Service Manual is updated only at irregular intervals.
You find the current printable version on our website.
(http://www.heidenhain.de/Services/...)
A zip file can be downloaded. This zip file can be unzipped with a password. Your receive this
password during a HEIDENHAIN service training course or upon telephoned request!
Loose-leaf binders or ring binders are only provided in connection with a service training course.
2.2

Further Service Manuals

May 2006
Theoretical explanation of functions and their correlations
Details of possible error reasons
Descriptions of error diagnosis
Details of corrective action
iTNC 530 single-processor with NC software 340420 / 421
iTNC 530 single-processor with NC software 340422 / 423
iTNC 530 dual-processor with NC software 340480 / 481
iTNC 530 single-processor with NC software 340490 / 491
iTNC 530 dual-processor with NC software 340492 / 493
The machine had been working perfectly before the error ocurred.
Only genuine spare parts are used!
Note
Basic knowledge in Windows is required for some descriptions in this Service Manual
concerning the handling of the dual-processor control iTNC 530 and the use of a service
laptop or PC.
Service Manual for Inverter Systems and Motors
2 – 11