Clutch - Suzuki GSX-R1000 2007 Service Manual

• Apply grease to the O-rings.
99000-25010: SUZUKI SUPER GREASE "A"
• Install the intake pipes with "UP" mark faces to the top side.
WATER BYPASS UNION
• Remove the water bypass union .
• Apply bond to the thread part of water bypass union and
tighten it to the specified torque.
99000-31140: SUZUKI BOND "1207B" or equivalent
" Water bypass union: 12 N·m (1.2 kgf-m, 8.5 lb-ft)

CLUTCH

CLUTCH DRIVE PLATE INSPECTION
NOTE:
* Wipe off engine oil from the clutch drive plates with a clean
rag.
* Clutch drive plate No.1: I.D. 111 mm (4.4 in)/
* Clutch drive plate No.2: I.D. 111 mm (4.4 in)/
* Clutch drive plate No.3: I.D. 118 mm (4.6 in)/
Refer to page 3-94 for details.
• Measure the thickness of drive plates with a vernier calipers.
• If the drive plate thickness is found to have reached the limit, replace it with a new one.
Drive plate thickness: Service Limit: 2.42 mm (0.095 in)
09900-20102: Vernier calipers
Friction piece: 36 pcs
Friction piece: 48 pcs
Friction piece: 36 pcs
" Friction piece
or equivalent
ENGINE 3-41
"UP"