• Refill specified front fork oil up to the top level of the outer
tube again. Move the outer tube up and down several strokes
until no more bubbles come out from the oil.
• Keep the front fork vertically and wait 5 – 6 minutes.
NOTE:
* Always keep oil level over the cartridge top end, or air may
enter the cartridge during this procedure.
* Take extreme care so as to pump out air completely.
• Hold the front fork vertically and adjust fork oil level with the
special tool.
NOTE:
When adjusting the fork oil level, compress the outer tube fully
without the fork spring.
Fork oil level: 124 mm (4.88 in)
09943-74111: Front fork oil level gauge
FRONT FORK INNER ROD LOCK-NUT
• Adjust the height
lock-nut as shown in illustration.
: 11 mm (0.43 in)
FORK SPRING
• Install the fork spring as shown in the illustration.
• Install the spring , washer , spacer and spring retainer
.
of the inner rod threads by turning the
CHASSIS 8-25
Upper side
Lower side