Suzuki GSX-R1000 2007 Service Manual page 383

• Tighten the sprocket mounting nuts to the specified torque.
" Rear sprocket nut: 60 N·m (6.0 kgf-m, 43.5 lb-ft)
NOTE:
Stamped mark " on the sprocket should face outside.
• Install the collar .
BRAKE DISC
• Apply THREAD LOCK to the disc bolts and tighten them to
the specified torque.
NOTE:
Make sure that the brake disc is clean and free of any greasy
matter.
99000-32130: THREAD LOCK SUPER "1360"
" Brake disc bolt: 35 N·m (3.5 kgf-m, 25.5 lb-ft)
• Install the collar .
REAR AXLE
• Remount the rear wheel, rear axle shaft and rear axle nut.
• Adjust the chain slack after rear wheel installation. (
or equivalent
2-22)
CHASSIS 8-49