Suzuki GSX-R1000 2007 Service Manual page 107

• Remove the oil seal
• Remove the gearshift shaft bearing with the special tool.
\ 09921-20240: Bearing remover set (15 mm)
Installation
• Install the bearings with the special tool.
\ 09913-70210: Bearing installer set (
NOTE:
The stamped mark side of the gearshift shaft bearing faces out-
side.
• Install the oil seal with the special tool.
\ 09913-70210: Bearing installer set (¬22)
• Apply grease to the oil seal lip.
X 99000-25010: SUZUKI SUPER GREASE "A"
• Install the gearshift cam
NOTE:
The stamped mark side of the gearshift cam bearing faces out-
side.
.
¬20)
¬22)
(
¬32)
(
with the bearing
or equivalent
.
ENGINE 3-57