Suzuki GSX-R1000 2007 Service Manual page 458

9-24 ELECTRICAL SYSTEM
Step 5
1) Inspect the ignition coil/plug caps. (
Is the ignition coil/plug cap OK?
YES
NO
Step 6
1) Measure the crankshaft position sensor peak voltage and its resistance. (
NOTE:
The crankshaft position sensor peak voltage inspection is applicable only with the multi circuit tester and
peak volt adaptor.
Is the peak voltage and resistance OK?
YES
NO
9-25)
Go to Step 6.
• Poor connection of the ignition coil/plug cap(-s).
• Faulty ignition coil/plug cap(-s).
• Faulty ECM
• Open or short circuit in wire harness
• Poor connection of ignition couplers
• Faulty CKP sensor
• Metal particles or foreign material being stuck on the CKP sensor and rotor tip
9-27)