Suzuki GSX-R1000 2007 Service Manual page 128

3-78 ENGINE
• Apply bond to the mating surface of the middle crankcase.
D 99000-31140: SUZUKI BOND "1207B" or equivalent
NOTE:
Use of bond is as follows:
* Make surfaces free from moisture, oil, dust and other foreign
materials.
* Spread on surfaces thinly to form an even layer, and assemble
the crankcases within few minutes.
* Take extreme care not to apply any bond to the oil hole, oil
groove and bearing.
* Apply to distorted surfaces as it forms a comparatively thick
film.
• Tighten the crankshaft journal bolts (M9) in ascending order
of numbers assigned to these bolts. Tighten each bolt a little
at a time to equalize the pressure in the following two steps.
" Crankshaft journal bolt (M9):
Initial: 18 N·m (1.8 kgf-m, 13.0 lb-ft)
Final : 50°
10 6 2
9 5 1
4 8
3 7