Suzuki GSX-R1000 2007 Service Manual page 141

• Install the washer
OIL PUMP
• Install the O-ring to the oil pump and apply grease to it.
Use a new O-ring to prevent oil leakage.
NOTE:
Set the oil pump shaft end " to the water pump shaft.
X 99000-25010: SUZUKI SUPER GREASE "A"
• Install the oil pump with the oil pump mounting bolts and then
tighten them to the specified torque.
" Oil pump mounting bolt: 10 N·m (1.0 kgf-m, 7.0 lb-ft)
• Install the washer
NOTE:
Be careful not to drop the washer
case.
• Install the oil pump driven gear
• Install the snap ring
CLUTCH
NOTE:
Before assembling the clutch, adjust the clutch lifter. ( 3-43)
• Install the thrust washer onto the countershaft.
NOTE:
The chamfer side " of thrust washer faces inside.
and snap ring .
and pin .
and pin
.
.
or equivalent
into the crank-
ENGINE 3-91