Suzuki GSX-R1000 2007 Service Manual page 468

9-34 ELECTRICAL SYSTEM
OIL PRESSURE INDICATOR
NOTE:
Before inspecting the oil pressure switch, check if the engine oil
level is correct. ( 2-12)
• Remove the right under cowling. (
• Disconnect the oil pressure switch lead wire from the oil pres-
sure switch.
• Turn the ignition switch ON.
• Check if the oil pressure indicator " will light and LCD # will
flicker, when grounding the lead wire.
If any indications are abnormal, replace the combination meter
with a new one after checking connection of couplers.
8-5)