Suzuki GSX-R1000 2007 Service Manual page 154

3-104 ENGINE
• Tighten the valve timing inspection plug
torque.
" Valve timing inspection plug: 11 N·m (1.1 kgf-m, 8.0 lb-ft)
CYLINDER HEAD COVER
• Pour engine oil in each oil pocket in the cylinder head.
NOTE:
Be sure to check the valve clearance. ( 2-7)
• Install the dowel pins.
• Install the O-rings.
• Install new gaskets to the cylinder head cover.
• Apply bond to the cam end caps of the gaskets as shown.
D 99000-31140: SUZUKI BOND "1207B" or equivalent
Use new gaskets to prevent oil leakage.
• Place the cylinder head cover on the cylinder head.
• Fit a new gasket
Use new gaskets to prevent oil leakage.
• Tighten the head cover bolts to the specified torque.
" Head cover bolt:
Initial: 10 N·m (1.0 kgf-m, 7.0 lb-ft)
Final : 14 N·m (1.4 kgf-m, 10.0 lb-ft)
to each head cover bolt.
to the specified