• Remove the ignition coils/plug caps.
* Do not pry up the ignition coil/plug cap with a screw
driver or a bar to avoid its damage.
* Be careful not to drop the ignition coil/plug cap to
prevent its short or open circuit.
• Disconnect the PAIR hoses
ENGINE SPROCKET AND GEARSHIFT LEVER
• Disengage the gearshift lever
• Remove the engine sprocket cover
• Remove the clutch push rod
• Remove the speed sensor rotor
• Remove the engine sprocket nut
.
from the gearshift shaft.
.
.
.
and the washer
.
ENGINE 3-7