Suzuki GSX-R1000 2007 Service Manual page 146

3-96 ENGINE
• Install the clutch springs and bolts.
• Hold the clutch housing with the special tool.
Be careful not to damage the clutch housing or clutch
plates.
\ 09920-53740: Clutch sleeve hub holder
• Tighten the clutch spring set bolts to the specified torque.
" Clutch spring set bolt: 10 N·m (1.0 kgf-m, 7.0 lb-ft)
NOTE:
Tighten the clutch spring set bolts diagonally.
CLUTCH COVER
• Apply bond lightly to the mating surfaces at the parting line
between the upper, middle and lower crankcases as shown.
D 99000-31140: SUZUKI BOND "1207B" or equivalent
• Install gasket and dowel pins.
Use a new gasket to prevent oil leakage.