Throttle Body Cleaning; Inspection - Suzuki GSX-R1000 2007 Service Manual

THROTTLE BODY CLEANING

#
Some carburetor cleaning chemicals, especially
dip-type soaking solutions, are very corrosive and
must be handled carefully. Always follow the chemical
manufacturer's instructions on proper use, handling
and storage.
• Clean passageways (except for main bore) with a spray-type
carburetor cleaner and blow dry with compressed air.
Do not use wire to clean passageways. Wire can dam-
age passageways. If the components cannot be
cleaned with a spray cleaner it may be necessary to
use a dip-type cleaning solution and allow them to
soak. Always follow the chemical manufacturer's
instructions for proper use and cleaning of the throttle
body components. Do not apply carburetor cleaning
chemicals to the rubber and plastic materials.

INSPECTION

• Check following items for any damage or clogging.
* O-rings
* Throttle valves
* Secondary throttle valves
* Vacuum hoses
* ISC valve hoses
* Fuel delivery pipes
* Cushion seals
* Fuel injectors ( 4-75, -77 and 5-24)
* ISC valve ( 4-79 and 5-25)
FUEL SYSTEM AND THROTTLE BODY 5-19