Installation - Suzuki GSX-R1000 2007 Service Manual

• Install the chain case  chain buffer  and rear fender .

INSTALLATION

Install the swingarm in the reverse order of disassembly and
removal, and pay attention to the following points:
SWINGARM PIVOT THRUST CLEARANCE ADJUSTMENT
Adjust swingarm pivot thrust clearance in the following procedure.
• Insert the swingarm pivot shaft and tighten it to the specified
torque.
09944-28320: Hexagon socket (19 mm)
" Swingarm pivot shaft: 15 N·m (1.5 kgf-m, 11.0 lb-ft)
• Hold the swingarm pivot shaft and tighten the swingarm pivot
nut to the specified torque.
" Swingarm pivot nut: 100 N·m (10.0 kgf-m, 72.5 lb-ft)
• Tighten the swingarm pivot lock-nut to the specified torque
with the special tool.
09940-14940: Swingarm pivot thrust adjuster socket
wrench
" Swingarm pivot lock-nut: 90 N·m (9.0 kgf-m, 65.0 lb-ft)
CHASSIS 8-63