Suzuki GSX-R1000 2007 Service Manual page 135

WATER PUMP
• Apply grease to the O-ring.
Use a new O-ring to prevent oil leakage.
X 99000-25010: SUZUKI SUPER GREASE "A"
• Tighten the water pump mounting bolts
torque.
" Water pump mounting bolt: 10 N·m (1.0 kgf-m, 7.0 lb-ft)
NOTE:
Pass the gear position switch lead wire
rib and clamp the gear position switch lead wire.
• Apply engine coolant to the O-ring.
Use a new O-ring to prevent engine coolant leakage.
• Install the water inlet cover
" Water inlet cover bolt: 10 N·m (1.0 kgf-m, 7.0 lb-ft)
NOTE:
Fit the clamp to the bolt ".
GENERATOR ROTOR
• Degrease the tapered portion " of generator rotor and also
the crankshaft #. Use nonflammable cleaning solvent to wipe
off oily or greasy matter and make these surfaces completely
dry.
or equivalent
to the specified
under the water pump
.
ENGINE 3-85