Suzuki GSX-R1000 2007 Service Manual page 259

4-104 FI SYSTEM DIAGNOSIS
ACTIVE CONTROL INSPECTION
1) Set up the SDS tool. (Refer to the SDS operation manual for
further details.)
2) Start the engine and run it idling condition.
3) Click "Cooling fan relay control"
4) Click the "Operate"
At this time, if an operation sound is heard from the cooling fan relay and cooling fan motor is operated,
the function is normal.
NOTE:
The cooling fan relay and cooling fan motor inspection is operational at any engine coolant temperature until
reaching 100 °C (212 °F). In a hot engine condition with the intake air temperature exceeding 40 °C (104
°F), however, the engine coolant temperature at which the inspection is operational will be restricted to 95
°C (203 °F).
5) Click the "Stop"
.
.
to check the operation properly.