Switch; Ignition Switch Removal; Ignition Switch Installation - Suzuki GSX-R1000 2007 Service Manual

9-38 ELECTRICAL SYSTEM

SWITCH

IGNITION SWITCH REMOVAL

• Remove the air cleaner box. (
• Disconnect the ignition switch lead wire coupler (Green) .
• Disconnect the immobilizer lead wire coupler (Black) .
(For E-02, 19, 24)
• Remove the cable guide .
• Remove the steering upper bracket. (
• Using a center punch, remove the ignition switch mounting
bolts.
• Remove the ignition switch .

IGNITION SWITCH INSTALLATION

Install the ignition switch in the reverse order of removal. Pay
attention to the following points:
• Install the ignition switch and new bolts.
• Tighten each bolt until its head is broken off.
NOTE:
The spare ignition switch comes equipped with the special bolts,
however, the bolts are also individually available as spare parts.
• Install the steering upper bracket. (
5-14)
8-33)
8-36)