Suzuki GSX-R1000 2007 Service Manual page 396

8-62 CHASSIS
SWINGARM BEARING
• Install the center spacer.
• Press the bearings into the swingarm pivot with the special
tool and suitable size socket wrench.
09941-34513: Steering race installer
NOTE:
When installing the bearing, stamped mark on the bearing must
face outside.
CUSHION LEVER BEARING
• Press the bearings into the cushion lever at 1 mm (0.04 in)
depth " and 0.5 mm (0.02 in) depth # from the cushion lever
surface with the special tool and suitable size socket wrench.
( 8-61)
09924-84521: Bearing installer set
NOTE:
When installing the bearing, stamped mark on the bearing must
face outside.
CUSHION ROD BEARING
• Press the bearings into the cushion rod at 1 mm (0.04 in)
depth $ from the cushion rod surface with the special tool
and suitable size socket wrench. (
09924-84521: Bearing installer set
NOTE:
When installing the bearing, stamped mark on the bearing must
face outside.
• Apply grease to the bearings, spacers.
99000-25010: SUZUKI SUPER GREASE "A"
8-61)
or equivalent