Suzuki GSX-R1000 2007 Service Manual page 119

• Remove the middle crankcase and measure the width of the
compressed plastigauge using the envelope scale. This mea-
surement should be taken at the widest part of the com-
pressed plastigauge.
Crankshaft journal oil clearance:
Standard: 0.010 – 0.028 mm (0.0004 – 0.0011 in)
Service Limit: 0.080 mm (0.0031 in)
• If the oil clearance exceeds the service limit, select the speci-
fied bearings from the bearing selection table.
• Check the corresponding crankcase journal I.D. code number
", "A", "B" or "C" which is stamped on the rear of upper
crankcase.
• Check the corresponding crankshaft journal O.D. code num-
ber #, "A", "B" or "C" which is stamped on the crankshaft.
Bearing selection table
Code
A
Crankcase
B
I.D. "
C
Crankcase I.D. specification
Code
A
B
C
Crankshaft journal O.D. #
A B
Green Black
Black Brown
Brown Yellow
I.D. specification
38.000 – 38.006 mm
(1.4961 – 1.4963 in)
38.007 – 38.012 mm
(1.4963 – 1.4965 in)
38.013 – 38.018 mm
(1.4966 – 1.4968 in)
C
Brown
Yellow
Blue
ENGINE 3-69