Suzuki GSX-R1000 2007 Service Manual page 289

• Apply thin coat of engine oil to the new O-rings
ion seals .
Replace the O-rings and cushion seals with new ones.
• Assemble the fuel delivery pipes as shown.
Be careful not to twist the fuel delivery pipe T-joint
when installing the fuel delivery pipes, or joint part &
of the fuel delivery pipe may get damage.
• Install each fuel injector by pushing it straight to the delivery
pipe.
• Install the fuel delivery pipe assembly to the throttle body.
Never turn the injector while pushing it.
• Tighten the fuel delivery pipe mounting screws to the speci-
fied torque.
" Fuel delivery pipe mounting screw:
and cush-
3.5 N·m (0.35 kgf-m, 2.5lb-ft)
FUEL SYSTEM AND THROTTLE BODY 5-21