Installation - Suzuki GSX-R1000 2007 Service Manual

7-8 COOLING AND LUBRICATION SYSTEM
• If the ECT sensor ohmic value does not change in the propor-
tion indicated, replace it with a new one.
Temperature sensor specification
Temperature
20 °C (68 °F)
50 °C (122 °F)
80 °C (176 °F)
110 °C (230 °F)
Cooling fan operating temperature:
Standard (OFF→ON): Approx. 105 °C (221 °F)
(ON→OFF): Approx. 100 °C (212 °F)
Intake air temperature at or above 40 °C (104 °F)
(OFF→ON): Approx. 100 °C (212 °F)
(ON→OFF): Approx. 95 °C (203 °F)
NOTE:
As coolant temperature rises, the cooling fan operates for 5 sec-
onds when the temperature arrives each at 50 °C (122 °F), 70
°C (158 °F) and 90 °C (194 °F)/4 000 r/min and more.
If the resistance is noted to show infinity or too much different
resistance value, replace the ECT sensor with a new one.
* Take special care when handling the ECT sensor. It
may cause damage if it gets a sharp impact.
* Do not contact the ECT sensor and the column ther-
mometer with a pan.

INSTALLATION

• Tighten the ECT sensor to the specified torque.
" ECT sensor: 18 N·m (1.8 kgf-m, 13.0 lb-ft)
Take special care when handling the ECT sensor. It
may cause damage if it gets a sharp impact.
• Pour engine coolant. ( 2-18)
• Bleed air from the cooling circuit. ( 2-19)
Standard resistance
Approx. 2.45 kΩ
Approx. 0.811 kΩ
Approx. 0.318 kΩ
Approx. 0.142 kΩ