Inspection - Suzuki GSX-R1000 2007 Service Manual

Step 5
1) Measure the generator no-load performance. (
Is the generator no-load performance OK?
YES
NO
Step 6
1) Inspect the regulator/rectifier. (
Is the regulator/rectifier OK?
YES
NO
Step 7
1) Inspect wirings.
Is the wirings OK?
YES
NO
Battery overcharges
• Faulty regulator/rectifier
• Faulty battery
• Poor contact of generator lead wire coupler

INSPECTION

BATTERY CURRENT LEAKAGE
• Remove the front seat. (
• Turn the ignition switch OFF.
• Disconnect the battery  lead wire.
• Measure the current between  battery terminal and the 
battery lead wire using the multi-circuit tester. If the reading
exceeds the specified value, leakage is evident.
09900-25008: Multi-circuit tester set
Battery current (leak): Under 3 mA
Tester knob indication: Current (
* In case of a large current leak, turn the tester to high
range first to avoid tester damage.
* Do not turn the ignition switch ON when measuring
current.
Go to Step 6.
Faulty generator
9-11)
Go to Step 7.
Faulty regulator/rectifier
Faulty battery
• Short circuit of wire harness
• Poor contact of couplers
8-8)
, 20 mA)
9-11)
ELECTRICAL SYSTEM 9-9
A