CLUTCH MASTER CYLINDER REASSEMBLY
AND REMOUNTING
Reassemble the master cylinder in the reverse order of removal
and disassembly. Pay attention to the following points:
* Wash the master cylinder components with fresh
brake fluid before reassembly. Never use cleaning
solvent or gasoline to wash them.
* Do not wipe the components with a rag.
* Apply brake fluid to the cylinder bore and all the
component to be inserted into the bore.
Specification and classification: DOT 4
• Apply brake fluid to the piston/cup set and install them to the
clutch master cylinder.
Spring
Primary cup
Piston
Secondary cup
Snap ring
• Install O-rings to the master cylinder and reservoir tank .
• Install the reservoir tank .
Use new O-rings to prevent fluid leakage.
• Apply SUZUKI SILICONE GREASE to the push rod.
• Install the push rod and dust boot.
99500-25100: SUZUKI SILICONE GREASE
or equivalent
CHASSIS 8-91