Suzuki GSX-R1000 2007 Service Manual page 130

3-80 ENGINE
TRANSMISSION
• Install the bearing pins
crankcase.
• Install the countershaft assembly to the middle crankcase.
NOTE:
Align the C-ring with the groove of bearing and the bearing pin
with the indent on the bearing.
• Install the driveshaft assembly to the middle crankcase.
NOTE:
Align the C-ring with the groove of bearing and the bearing pin
with the indent on the bearing.
• Install the oil seal
• Turn the bearings to fit the bearing dowel pins " in the
respective positions.
• Install the O-rings and dowel pins.
and the C-rings
.
on the middle