Suzuki GSX-R1000 2007 Service Manual page 125

• Apply a small quantity of MOLYBDENUM OIL SOLUTION to
the sliding surface of the pistons and cylinder walls.
P MOLYBDENUM OIL SOLUTION
NOTE:
Be sure to install the pistons in the cylinders from which they
were removed in disassembly, referring to the cylinder numbers,
"1" through "4", scribed on the piston.
• Install the pistons with conrods into the cylinders from topside
using the special tool.
NOTE:
When installing the pistons, the indent $ of each piston head
must be brought to the exhaust side.
\ 09916-77310: Piston ring compressor
Be careful not to damage the cylinder wall and piston
jet by the conrod.
• Check that I.D. code % on each conrod faces intake side.
Be sure to clean the conrod big end.
• Apply a MOLYBDENUM OIL SOLUTION to each crank pin
bearing surface and crankshaft journal bearing surface.
P MOLYBDENUM OIL SOLUTION
ENGINE 3-75