Suzuki GSX-R1000 2007 Service Manual page 426

8-92 CHASSIS
• Apply SUZUKI SILICONE GREASE to the bushing and clutch
lever pivot bolt.
99000-25100: SUZUKI SILICONE GREASE
" Clutch lever pivot bolt: 1.0 N·m (0.1 kgf-m, 0.7 lb-ft)
Clutch lever lock-nut: 6.0 N·m (0.6 kgf-m, 4.5 lb-ft)
• Align the convex part " of clutch switch with the hole # of
master cylinder when installing the brake light switch.
• When remounting the clutch master cylinder onto the handle-
bar, align the master cylinder holder's mating surface with
punch mark $ on the handlebar and tighten the upper clamp
bolt  first.
" Clutch master cylinder mounting bolt:
• Tighten the clutch hose union bolt to the specified torque.
(Clutch hose routing:
" Clutch hose union bolt: 23 N·m (2.3 kgf-m, 16.5 lb-ft)
• Connect the clutch lever position switch lead wires.
* The seal washers should be replaced with new ones
to prevent fluid leakage.
* Bleed air from the system after reassembling the
master cylinder. (
10 N·m (1.0 kgf-m, 7.0 lb-ft)
10-23)
2-17)
or equivalent
"UP" mark
Clearance