Suzuki GSX-R1000 2007 Service Manual page 140

3-90 ENGINE
GEARSHIFT SYSTEM
• Install the gearshift cam stopper
return spring .
NOTE:
Apply a small quantity of thread lock to the gearshift cam stop-
per bolt and tighten it to the specified torque.
H 99000-32110: THREAD LOCK SUPER "1322"
" Gearshift cam stopper bolt: 10 N·m (1.0 kgf-m, 7.0 lb-ft)
NOTE:
Hook the return spring end " to the stopper
• Check the gearshift cam stopper moves smoothly.
• Locate the gearshift cam in the neutral position.
• Install the gearshift cam stopper plate
NOTE:
Align the gearshift cam pin # with the gearshift cam stopper
plate hole $.
• Apply a small quantity of thread lock to the gearshift cam
stopper plate bolt and tighten it to the specified torque.
H 99000-32110: THREAD LOCK SUPER "1322"
" Gearshift cam stopper plate bolt:
• Install the gearshift shaft assembly
shown.
NOTE:
Pinch the gearshift arm stopper
, its bolt , washer
or equivalent
.
.
or equivalent
13 N·m (1.3 kgf-m, 9.5 lb-ft)
and washer
with return spring ends %.
and
as