Suzuki GSX-R1000 2007 Service Manual page 132

3-82 ENGINE
• Tighten the crankcase bolts a little at a time to equalize the
pressure.
NOTE:
* Fit the new copper washers to the crankcase bolts #.
* Fit the new gasket washers to the crankcase bolts $.
" Crankcase bolt: (M6) Initial: 6 N·m (0.6 kgf-m, 4.5 lb-ft)
Use new copper washers and new gasket washers to
prevent oil leakage.
• Check that the countershaft and driveshaft rotate smoothly.
OIL STRAINER
• Install the O-ring.
• Apply grease to the O-ring.
X 99000-25010: SUZUKI SUPER GREASE "A"
Use a new O-ring to prevent oil leakage.
• Install the oil strainer
specified torque.
" Oil strainer bolt: 11 N·m (1.1 kgf-m, 8.0 lb-ft)
Final : 11 N·m (1.1 kgf-m, 8.0 lb-ft)
(M8) Initial : 15 N·m (1.5 kgf-m, 11.0 lb-ft)
Final : 26 N·m (2.6 kgf-m, 19.0 lb-ft)
and tighten the oil strainer bolts to the
or equivalent