Communication Switches - Ricoh D069 Field Service Manual

7. Appendix: Fax Service Program (Only For D068/D069)
Page separation
2 0: Enabled
1: Disabled
Printing the sample image on reports
Bit 4: 0, Bit 3: 0 = The upper half only
Bit 4: 0, Bit 3: 1 = 50% reduction in sub-
3-4
scan only
Bit 4: 1, Bit 3: 0 = Same size
Bit 4: 1, Bit 3: 1 = Not used
5-6 Not used
Equalizing the reduction ratio among
separated pages
(Page Separation)
7
7
0: Enabled
1: Disabled
Printer Switch 0F [SP No. 1-103-016]
No
Smoothing feature
Bit 1: 0 Bit 0: 0 = Disabled
0-1 Bit 1: 0 Bit 0: 1 = Disabled
Bit 1: 1 Bit 0: 0 = Enabled
Bit 1: 1 Bit 0: 1 = Not used
2-7 Not used

Communication Switches

Communication Switch 00 [SP No. 1-104-001]
No
264
FUNCTION
FUNCTION
1: If all paper sizes in the machine require page
separation to print a received fax message, the
machine does not print the message (Substitute
Reception is used).
After a larger size of paper is set in a cassette, the
machine automatically prints the fax message.
"Same size" means the sample image is printed at
100%, even if page separation occurs.
User Parameter Switch 19 (13H) bit 4 must be set
to "0" to enable this switch.
Refer to Detailed Section Descriptions for more on
this feature.
Do not change the settings.
0: When page separation has taken place, all the
pages are reduced with the same reduction ratio.
1: Only the last page is reduced to fit the selected
paper size when page separation has taken place.
Other pages are printed without reduction.
COMMENTS
(0, 0) (0, 1): Disable smoothing if the machine receives
halftone images from other manufacturers fax machines
frequently.
Do not change the settings.
COMMENTS