Toshiba e-STUDIO 2555C Service Manual page 1112

Sub
05/08 Mode Element
element
05 Adjustmen Printer Feeding Adjustment of paper
t mode system/Pa pushing amount at
per bypass feeding
transport
05 Adjustmen Printer Feeding Adjustment of paper
t mode system/Pa pushing amount/1st
per drawer
transport
05 Adjustmen Printer Feeding Adjustment of paper
t mode system/Pa pushing amount/1st
per drawer
transport
05 Adjustmen Printer Feeding Paper aligning
t mode system/Pa amount adjustment
per
transport
05 Adjustmen Printer Feeding Paper aligning
t mode system/Pa amount adjustment
per
transport
Item Subitem Code
4112
4113
4113
1st drawer 4115
1st drawer 4115
Sub- Default Acceptable
Details
code value value
1 Thick paper/Special 22 0-63
paper/Transparencies
0 Plain paper/Recycled Refer to 0-63
paper content
1 Thick paper/Special 22 0-63
paper
0 Thick paper1 ;Long Refer to 0-63
size content
s
1 Thick paper1 ;Middle Refer to 0-63
size content
s
53
RAM Contents
M When the value increases by "1", the paper pushing
amount at bypass feeding increases by approx. 0.54
mm.
M When the value increases by "1", the paper pushing
amount at feeding from 1st drawer increases as follows:
25/30/35ppm: 1.08 mm
45/50ppm: 1.62 mm
<Default value>
25/30/35ppm: 6
45/50ppm: 4
M When the value increases by "1", the paper pushing
amount at feeding from 1st drawer increases by approx.
0.54 mm.
M When the value increases by "1", the aligning amount
increases by approx. 0.54 mm.
<Paper length>
Long size: 330 mm or longer
Middle size: 220 mm to 329 mm
Short size 1: 205 mm to 219 mm
Short size 2: 160 mm to 204 mm
Short size 3: 159 mm or shorter
<Default value>
25/30/35/45/50ppm: 26
M When the value increases by "1", the aligning amount
increases by approx. 0.54 mm.
<Paper length>
Long size: 330 mm or longer
Middle size: 220 mm to 329 mm
Short size 1: 205 mm to 219 mm
Short size 2: 160 mm to 204 mm
Short size 3: 159 mm or shorter
<Default value>
25/30/35/45/50ppm: 23
Proce Servic
dure e UI
4
4
4
4 Yes
4 Yes