Table of Contents
Advertisement
IP Firewall
BCM50 Integrated Router Firewall Configuration
Configuring the Firewall
Use the following procedure to configure the Firewall options on the BCM50
Integrated Router.
1. Access the Web Router GUI (refer to the Accessing the Web Router
GUI section of this guide).
2. From the Main Menu, click on Firewall.
3. On the Summary tab, configure the options as required:
Select a Packet Direction, e.g. LAN to WAN etc.
Select the Action for packets that don't match firewall
rules for the chosen Packet Direction.
4. Click on Insert to add a new rule (refer to Inserting a Firewall Rule
below).
Note: Consider carefully the order in which the rules are applied. If using
multiple rules and re-ordering is required, select the rule to move and use the
Move button to place the rule correctly.
5. You can also Edit (for configuration instructions, refer to the Inserting
a Firewall Rule section below), or Delete existing rules.
6. Click Apply to save your settings.
16
NN40011-045 Issue 1.2 BCM50 Rls 6.0
Advertisement
Table of Contents
