Fuji Xerox apeosport-iv C5570 Administrator's Manual page 517

Category
Error Code
C P F S M O
047-216
O O O O O O [Cause]
047-217 O O O O O O [Cause]
047-320 O O O
* If you cannot resolve an error despite following the instructions described in the table, contact our Customer Support
Center. The contact number is printed on the label or card attached on the machine.
Cause and Remedy
An error occurred while detecting the finisher.
[Remedy] Switch off the machine power, make sure that the touch
screen is blank, and then switch on the machine power. If
the same message is displayed again, contact our
Customer Support Center.
An error occurred while detecting Tray 6 (HCF B1).
[Remedy] Switch off the machine power, make sure that the touch
screen is blank, and then switch on the machine power. If
the same message is displayed again, contact our
Customer Support Center.
[Cause] An error occurred.
[Remedy] Switch off the machine power, make sure that the touch
screen is blank, and then switch on the machine power. If
the same message is displayed again, contact our
Customer Support Center.
Error Code
14
515