Fax Received Options; Reduce/Enlarge Presets - Fuji Xerox apeosport-iv C5570 Administrator's Manual

Fax Received Options

Fax Received Options allows you to specify a method for classifying received fax
documents into specified folders.
Folder Selector Setup
If you set the classification by line type, the machine classifies the received documents by line
type and store them in the folders specified.
1
Select [Folder Selector Setup].
2
Select the line to register, and then select
[Change Settings].
Note • The displayed items may vary depending
3
Select [On].
4
Enter the folder number (three-digits) where
you want to store the faxes with the numeric
keypad.
5
Select [Save].
Output Destination Setup
In [Output Destination Setup], you can set the output destination for each receiving line.
Note • This feature does not appear for some models. An optional component is required. For more
• The displayed items may vary depending on the options installed.
Fax Received - Line 1 to 3
Specify output tray for each line.
Public Folder Printed Files
Specifies output tray for public folder for polling.

Reduce/Enlarge Presets

You can set the magnifications displayed as [Preset %] which are displayed under
[Reduce/Enlarge] in the [Layout Adjustment] screen. You can assign any magnification
to the R/E Preset buttons other than [100%] and [Auto %].
Preset %
You can select from preset ratios.
Variable %
You can specify a magnification from 50 to 400% in 1% increments.
on the options installed.
information, contact our Customer Support Center.
Fax Service Settings
5
215