Default Language - Fuji Xerox apeosport-iv C5570 Administrator's Manual

Auto Display of Login Screen
When the Authentication feature is enabled on the machine, set whether or not to
automatically display the login screen after turning on the machine or canceling the Energy
Saver mode.
Custom Buttons 1 to 3
You can assign services such as Copy and Send from Folder to the custom buttons on the
control panel: Custom Button 1 to Custom Button 3.
To leave a feature unassigned, select [(Not Set)].
For more information, refer to "Customizing the Control Panel" (P.26).
Note • Copy service is assigned to [Custom Button 1] and Review is assigned to [Custom Button 3]
by factory default.
One-touch Buttons
Set the number of address numbers that are assigned to the one touch buttons.
Type 1
Assigns the one touch buttons 1 to 70 to the address numbers 0001 to 0070, and
buttons 71 and 72 to the stored programming jobs 1 and 2.
Type 2
Assigns the one touch buttons 1 to 60 to the address numbers 0001 to 0060, and
buttons 61 to 72 to the stored programming jobs 1 and 12.
Note • [Type 1] is selected by factory default.
Services Home
Set the layout of service buttons that appear on the [Services Home] screen.
For more information on how to set the buttons, refer to "Customizing the Control Panel" (P.26).
Services Home - Additional Features
Set the layout of additional feature buttons that appear on the [Services Home] screen.
Note • If you do not want to display [Setup] as an additional feature button, select [Show this in
Admin mode] check box. You can set or change settings with the machine only when it is in
the System Administration mode.
For more information on how to set the buttons, refer to "Customizing the Control Panel" (P.26).
Job Type on Job Status screen
Select the job types to be shown on the [Completed Jobs] screen under the [Job Status]
screen that is displayed when the <Job Status> button on the control panel is pressed.
Select from [All Jobs], [Printer & Print from Folder Jobs], [Scan, Fax, & Internet Fax Jobs], or
[Job Flow & File Transfer Jobs].

Default Language

You can select the language displayed on the machine.
There are two ways of selecting the language: set in the System Administration mode and set
by local users.
Setting in the System Administration mode
The language set here is the standard language that is retained even when the machine is
powered off and on.
Setting by local users
The language setting in [Language] in the [Services Home] screen is lost when the machine
is powered off.
Common Service Settings
137
5