Loading Paper In Tray 4 (When Tandem Tray Module Is Installed) - Fuji Xerox apeosport-iv C5570 Administrator's Manual

1
Pull out the tray until it stops.
Important • Make sure to pull out the tray slowly.
• While the machine is processing a job, do
• To prevent paper jams or erroneous
2
Load and align the edge of the paper against
the left edge of the tray, with the side to be
copied or printed on facing down.
Important • Do not load paper above the maximum fill
3
Push the tray in gently until it stops.

Loading Paper in Tray 4 (When Tandem Tray Module is Installed)

The following describes the procedure for loading paper in Tray 4 when the Tandem
Tray Module is installed.
When the machine runs out of paper during copying or printing, a message appears on
the touch screen. Add paper according to the message instructions. Copying or printing
automatically resumes when paper is added.
Note • Carefully fan the paper before loading it in a tray. Otherwise, the paper may stick together,
For information on changing the paper size and orientation, refer to "Changing the Paper Size for Tray 4
(When Tandem Tray Module is Installed)" (P.50).
1
Pull out Tray 4 until it stops.
Important • Make sure to pull out the tray slowly.
• While the machine is processing a job, do
• To prevent paper jams or erroneous
When the tray is being pulled out with
force, the tray may possibly hit your
knees or other parts of your body causing
injuries.
not pull out the tray that is being used for
the job.
detection of loaded paper in a tray by the machine, do not add paper on top of any remaining
paper in the tray.
line ("MAX" in the right figure). It may
cause paper jams or machine
malfunction.
resulting in paper jams.
When the tray is being pulled out with
force, the tray may possibly hit your
knees or other parts of your body causing
injuries.
not pull out the tray that is being used for
the job.
detection of loaded paper in a tray by the machine, do not add paper on top of any remaining
paper in the tray.
Loading Paper
2
45