Fuji Xerox apeosport-iv C5570 Administrator's Manual page 201

PostScript Default Color
Set the default value for Post Script output color.
Note • This feature does not appear for some models. An optional component is required. For more
information, contact our Customer Support Center.
PostScript Paper Supply
Select whether the PostScript DMS (Deferred Media Selection) feature is enabled or disabled
when the paper tray is selected. Select [Auto Select] to enable the DMS feature, or [Select
Paper Tray] to disable the feature.
When PostScript data generated by other than the print driver is printed, the tray is not
selected as intended depending on the description method of the PostScript data. In this
case, select [Select Paper Tray].
Note • Even when you select [Auto Select], the setting is automatically changed to [Select Paper
Tray] when [Use Larger Size] or [Use Closest Size] is selected for [Substitute Tray] and print
PostScript data.
• This feature does not appear for some models. An optional component is required. For more
information, contact our Customer Support Center.
PostScript Font Absence
Set an action to take when a PostScript font specified in a job is not present.
Note • This feature does not appear for some models. An optional component is required. For more
information, contact our Customer Support Center.
Cancel Printing
Cancels printing.
Substitute Font and Print
Prints using a substitute font. Courier is used as the substitute font.
PostScript Font Substitution
Set whether or not to use ATCx as a substitute if a PostScript font specified in a job is not
present.
Note • This feature does not appear for some models. An optional component is required. For more
information, contact our Customer Support Center.
XPS Print Ticket Processing
Set how the machine processes the print tickets written in XPS documents.
Off
Does not process print tickets.
Standard Mode
Uses the standard mode to process print tickets.
Compatible Mode
Uses the Microsoft-compliant mode to process print tickets.
LPD Print Queue
Set the LPD print sequence.
Note • If you change the [LPD Print Queue] setting, the [Receiving Buffer - LPD] setting may
automatically be changed. For more information on Receiving Buffer - LPD Spool, refer to
"Receiving Buffer - LPD" (P.195).
For more information on Receiving Buffer - LPD Spool, refer to "Receiving Buffer - LPD" (P.195).
Data Processing Order
Prints jobs in the order of becoming print-ready status after receiving the jobs.
Print Service Settings
199
5