Fuji Xerox apeosport-iv C5570 Administrator's Manual page 41

Basis Weight
Paper Name Size
P801 A4
24Up A4
8Up A4
1Up A4
Laser card A4
040P00142
Universal A4
Transparency
Plain 115MIC
V510 A4
16Up A4
*1:Select the paper type setting for the paper loaded on a tray. For more information, refer to "Changing
the Paper Settings" (P.53).
*2:Most ideal image quality with the paper can be obtained by setting the image quality for each type of
paper. For more information on the settings, refer to "Image Quality" (P.140).
Note • For more information on special paper such as other heavyweight paper, contact our
Customer Support Center.
Paper
*1
(gsm)
Type
Unknown Trans-
parency
Unknown Labels
Unknown Labels
Unknown Labels
Card 100 Heavy-
weight
Unknown Trans-
parency
Unknown Trans-
parency
Unknown Labels
Image
Notes / Countermeasure
*2
Quality
- The paper is charged with
static electricity after a copy
or print job.
When using Tray 5, insert
another type of paper at the
bottom of the stack before
loading transparencies.
- Print one sheet at a time,
using Tray 5.
Do not reuse the used label
or partially peeled label.
- Print one sheet at a time,
using Tray 5.
Do not reuse the used label
or partially peeled label.
- Print one sheet at a time,
using Tray 5.
Do not reuse the used label
or partially peeled label.
Extra When using Tray 5, load the
Heavyweight A paper with the center slightly
curling upward.
When using the Finisher-A1
to deliver the output, load the
paper with the edge without a
card attached facing the
feeding slot of the tray.
- If two or more sheets of
transparencies are being fed
simultaneously (double-
feed), load one sheet at a
time.
- Transfer deterioration might
be occurred when copying or
printing in color. Also, toner
may spatter on color images
in prints.
When using Tray 5, insert
another type of paper at the
bottom of the stack before
loading transparencies.
-
Paper Types
2
39