Fuji Xerox apeosport-iv C5570 Administrator's Manual page 456

14 Problem Solving
Error Code
C P F S M O
016-503
016-504
016-505
016-506
016-507
016-508
016-509
016-510
14
016-511
016-512
* If you cannot resolve an error despite following the instructions described in the table, contact our Customer Support
Center. The contact number is printed on the label or card attached on the machine.
454
Category
O [Cause]
[Remedy] Check on CentreWare Internet Services whether the
O [Cause]
[Remedy] Check on CentreWare Internet Services whether the
O [Cause]
[Remedy] Check on CentreWare Internet Services whether the user
O [Cause]
[Remedy] Execute the job again. If the error still is not resolved, take
O [Cause]
[Remedy] Either set the forwarding rule for image logs from the
O [Cause]
[Remedy] Set the forwarding rule for image logs from the server to
O [Cause]
[Remedy] Either set the forwarding rule for image logs from the
O [Cause]
[Remedy] Set the forwarding rule for image logs from the server to
O [Cause]
[Remedy] Confirm the forwarding rule for image logs from the server
Cause and Remedy
Unable to resolve the SMTP server name when sending e-
mail.
SMTP server settings are correct. Also, confirm whether
the DNS server settings are correct.
Unable to resolve the POP3 server name when sending e-
mail.
POP3 server settings are correct. Also, confirm whether
the DNS server settings are correct.
Unable to log into the POP3 server when sending e-mail.
name and password used on the POP3 server are correct.
Unable to write the image log because the image log
storage space is insufficient on the machine.
one of the following measures:
Delete unnecessary image logs
Change the [Assurance Level] for image logs to [Low]
In this case, the contents of the logs is not secured.
When using the Image Log Control feature, failed to
forward the image log to the server.
server to the machine, or set [Transfer Image Log] to
[Disabled].
When using the Image Log Control feature, failed to
forward the image log to the server.
the machine.
When using the Image Log Control feature, failed to
forward the image log to the server because the
forwarding rule for image logs from the server to the
machine has not been set.
server to the machine, or set [Transfer Image Log] to
[Disabled].
When using the Image Log Control feature, failed to
forward the image log to the server because the
forwarding rule for image logs from the server to the
machine has not been set.
the machine.
When using the Image Log Control feature, failed to
forward the image log to the server because the
forwarding rule for image logs from the server to the
machine has not been set correctly.
to the machine.